Wing-Surfer Foil Collection

Wing-Surfer MK4

Designed to “check all of the boxes” in terms of performance, features, and range, the future of winging is here with the Wing-Surfer MK4. This fourth generation Wing-Surfer combines the perfect balance of low-end-power, rigidity, and twist for optimum sheet-in-and-go power and speed. An increased diameter leading edge and strut adds to the MK4’s stiffness, resulting in great stability and power. The Wing-Surfer MK4 has three long and ergonomic control handles for added comfort and control as well as an added ‘power handle’ for sheeting in hard and jumping. Smaller windows have reduced the Wing-Surfer’s overall weight with zero compromises in visibility. For those who are in search of the best combo of get-up-and-go power, a wide wind range, insane top speed, and unmatched jumping ability, the Wing-Surfer MK4 is the wing you can’t live without.

DETAILS:

Dump Valve

A new strut dump valve has been added for quicker deflation to make packing your wing faster and easier.

MK4 Handle Layout

The MK4 Handle Layout features 3 long ergonomically shaped handles and 1 power handle and has been strategically placed for maximum comfort and control.   

Harness Line Attachment

Easily attach your harness lines if you choose to wear a harness during your session.

Leading Edge Reinforcements

The leading edge reinforcements increase the MK4’s durability and adds a layer of protection from abrasions.

Leading Edge Grab Handle with Neoprene Patch

The neoprene patch protects the hands when flagging the wing on a downwinder or while wave riding. The larger sizes of the MK4 feature 2 additional leading edge handles that make it easy to turn the wing around on the beach and on the water.

Leech Battens

Maximize trailing edge stability.

Straight Valve Connection

The straight valve connection allows air to easily flow from the leading edge strut to the center strut.

HT Plus Seam

Our high-tenacity thread strengthens the leading edge along the seam, allowing you to confidently inflate your wing to a higher pressure for optimum performance.

Bladder Lock

The bladder lock secures the bladder ends and prevents the bladder from slipping out of place.

SureLock Valve

Streamlined valve and pump hose locks to the valve.

One Point Inflation System

Our one point inflation system provides quick and easy inflation and deflation of the wing.

Coil Wrist Leash

Provides a comfortable and secure wing-to-rider connection ensuring you don’t lose your wing.

Wing-Surfer MK4 Bag

(Included) The bag provides easy and compact storage with an added pump attachment. *AIRMAX 2 PUMP IS NOT INCLUDED

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

JET 1050 & 1250 SEMI-COMPLETE

Foil Surfing/Wake Foiling/Wing-Surfing

Naish Jet foils feature a medium aspect ratio delta-wing planform with moderate anhedral to deliver the optimum combination of early lift, speed, and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from windsurfing and wing-surfing to downwind kite foiling. The 1050 and 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for light wind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320, which gives the complete setup more intuitive turning and response for pumping. 

JET 1650, 2000 & 2450 SEMI-COMPLETE

Foil Surfing/Downwind Foiling/Wing-Surfing

The Jet 1650, 2000 & 2450 share many similar features to their smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind, and Wing-Surf foiling. These wings are paired with the Stabilizer 450, which gives the complete setup more lift at lower speeds and is optimized for improved turning and pumping performance.

Jet 1050 is ideal for riders 120-170 lbs

Jet 1250 is ideal for riders 160-210 lbs

Jet 1650 is ideal for riders up to 225 lbs

Jet 2000 is ideal for riders up to 250 lbs

Jet 2450 is ideal for riders +250 lbs

CONSTRUCTION FEATURES

100% Pre-preg 3K High Gloss Carbon Fiber Front Wing and Stabilizer

CNC Precision Cut Lightweight Aluminum Fuselage with Corrosion Resistant      Stainless Steel M6 Helicoils for the Front Wing and Stabilizer Connection

Stainless Steel M6 Torx T30 Hardware for all Screwed Connections

SET INCLUDES

• Jet 1050, 1250, 1650, 2000 or 2450 Front Wing 
• Jet Stabilizer 320 or 450 
• 64 cm Fuselage
• 5 x 20 mm Torx Head Stainless Steel Screws (Connects Wings to Fuselage) = Superior torque + corrosion resistant
• 4 x 30 mm M6 T30 Torx Head Stainless Steel Screws and 4 x M6 T nuts (Connects Standard Plate to Board) = Superior torque + corrosion resistant
• EVA Wing and Stabilizer Covers
• Carry Case 
• Naish Torx T30 Driver 

The Jet 1050 & 1250 includes:

• Jet 1050 or 1250  front wing (with EVA cover)
• Jet 320 stabilizer (with EVA cover)

The Jet 1650, 2000 & 2450 includes:

• Jet 1650, 2000 or 2450 front wing (with EVA cover)
• Jet 450 stabilizer (with EVA cover)

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

JET HA 1040, 1240, 1400, 1800 & 2140

Expert Performance Foil Surfing/Downwind Foiling/Wing-Surfing

Designed for advanced and semi-advanced foilers looking to push their performance levels in surf, SUP, wing-surfing, and downwind foiling. New for this season is the 1040 and 2140, further expanding the HA range. The 1040 is fast, nimble, and great for high-speed foiling. Lighter riders will love the feel of this foil when wing foiling or surfing. These wings feature high aspect ratio planforms and proprietary thin section profiles — the result is maximum glide, excellent pumping, and improved top speed while still maintaining the excellent turning and control that defines the Jet range. To complement the high-end performance of these new wings, the complete foils feature a new high aspect stabilizer that emphasizes pumping ability and glide. Designed with a thinner profile and higher aspect ratio, they support the higher speed of the HA front wings while giving excellent response to rider input.

The 2140 pushes the envelope of flatwater pumping. This foil excels at low speeds or when wing foiling in light winds. 

 CONSTRUCTION FEATURES:

• 100% Pre-preg 3K High Gloss Carbon Fiber Front Wing and Stabilizer
• CNC Precision Cut Lightweight Aluminum Fuselage with Corrosion Resistant Stainless Steel M6 Helicoils for the Front Wing and Stabilizer Connection
• Stainless Steel M6 Torx T30 Hardware for all Screwed Connections

SET INCLUDES:

• Jet HA 1040, 1240, 1400, 1800 or2140 Front Wing 
• Stabilizer HA 220, 280 or 310 Back Wing 
• 64 cm Fuselage
• 5 x 20 mm Torx Head Stainless Steel Screws (Connects Wings to Fuselage)
• 4 x 30 mm M6 T30 Torx Head Stainless Steel Screws and 4 x M6 T nuts (Connects Standard Plate to Board) 
• EVA Wing and Stabilizer Covers
• Carry Case 
• Naish Torx T30 Driver

The Jet HA 1040 includes:

• Jet HA 1040 front wing (with EVA cover)
• Jet HA 220 stabilizer (with EVA cover)

The Jet HA 1240/1400 includes:

• Jet HA 1240 or 1400 front wing (with EVA cover)
• Jet HA 280 stabilizer (with EVA cover)

 The Jet HA 1800/2140 includes:

• Jet HA 1800 or 2140 front wing (with EVA cover)
• Jet HA 310 stabilizer (with EVA cover)

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

JET MA 850, 1000, 1200, 1600 and 2000

Naish is pleased to introduce the MA series. This new design marries the proven DNA of the successful Naish HA series with a medium aspect ratio ('MA') planform. The reduced span results in faster, more responsive turning while the global geometry delivers the perfect balance of early take off, roll stability and pitch control at speed. The truncated wingtip concept provides the maximum possible glide for the reduced span, making maneuvers effortless while significantly reducing drag for higher top speeds - the bluntness of the tip is also an important safety feature. The result is a foil that is both easy to ride and yet offers top performance for riders pushing the limits with jumping and maneuvers. 

This new design is offered in a full range of sizes so that riders of different weights and skill levels can optimize their set up for the ultimate wing foiling experience. 

CONSTRUCTION FEATURES

SET INCLUDES

• Jet MA 850, 1000, 1200, 1600 or 2000 Front Wing
• Jet HA 220, 280 or 310 Stabilizer
• 64 cm Fuselage
• 5 x 20 mm Torx Head Stainless Steel Screws (Connects Wings to Fuselage) = Superior torque + corrosion resistant
• 4 x 30 mm M6 T30 Torx Head Stainless Steel Screws and 4 x M6 T nuts (Connects Standard Plate to Board) = Superior torque + corrosion resistant
• EVA Wing and Stabilizer Covers
• Carry Case 
• Naish Torx T30 Driver

The Jet MA 850 & 1000 includes:

• Jet 850 or 1000  front wing (with EVA cover)
• Jet HA 220 stabilizer (with EVA cover)

The Jet MA 1200 & 1600 includes:

• Jet 1650, 2000 or 2450 front wing (with EVA cover)
• Jet HA 280 stabilizer (with EVA cover)

The Jet MA 2000 includes:

• Jet MA 2000 front wing (with EVA cover)
• Jet HA 310 stabilizer (with EVA cover)

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

SIZES: 55 cm | 64 cm | 95 cm | 95 cm DT

55 cm - Our shortest fuselage, designed for maximum turning - popular for surf foiling, kite foiling and wing foiling

64 cm -The standard fuselage length that provides the best all-around performance and delivers the optimum combination of turning ability, pumping and pitch stability for surf, wing foiling and kite foiling

95 cm - Ideal for windsurf foiling for boards with track boxes as well as a great choice for wing foiling for riders looking for maximum pitch stability and control at high speeds

95 cm DT - Ideal for windsurf foiling for windsurf boards that feature a DeepTuttle box.The mast position on this fuselage is set further aft, achieving the perfect balance point for windsurf boards with the box mounted at the tail.

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

JET MA 850, 1000, 1200, 1600 and 2000 FRONT WING

Naish is pleased to introduce the MA series. This new design marries the proven DNA of the successful Naish HA series with a medium aspect ratio ('MA') planform. The reduced span results in faster, more responsive turning while the global geometry delivers the perfect balance of early take off, roll stability and pitch control at speed. The truncated wingtip concept provides the maximum possible glide for the reduced span, making maneuvers effortless while significantly reducing drag for higher top speeds - the bluntness of the tip is also an important safety feature. The result is a foil that is both easy to ride and yet offers top performance for riders pushing the limits with jumping and maneuvers. 

This new design is offered in a full range of sizes so that riders of different weights and skill levels can optimize their set up for the ultimate wing foiling experience.

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

The Carbon mast utilizes 100% carbon fiber construction over the high-density PVC foam core. Its 12 cm chord and thinner foil section provide high speeds and maneuverability. This mast’s extremely stiff and direct feel offers the most direct connection to your foil possible.

TECHNOLOGY

• New 75 cm, 85 cm and 95 cm carbon masts
• Lightweight UD, high modulus and 3k carbon layup with a foam core
• Glossy speed finish
• New shape achieving increased speeds and tighter turning
• Includes 3x 25 mm M6 SS Torx Screws to mount fuselage to mast
• Does NOT include screws to mount mast to board

* Available in Direct Connect board mount only

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

JET 1050 + 1250

Naish Jet foils feature a medium aspect ratio delta-wing planform with moderate anhedral to deliver the optimum combination of early lift, speed, and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from windsurfing and wing-surfing to downwind kite foiling. The 1050 and 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for light wind kite foiling and windsurf foiling on crossover style boards.

JET1650, 2000, 2450

The Jet 1650, 2000, and 2450 share many similar features to their smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind, and Wing-Surf foiling.

*Includes EVA Front Wing Cover

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

JET HA 1040, 1240, 1400, 1800 & 2140

Designed for advanced and semi-advanced foilers looking to push their performance levels in surf, SUP, Wing-surfer, and downwind foiling. New for this season is the 1040 and 2140, further expanding the HA range. These wings feature high aspect ratio planforms and proprietary thin section profiles — the result is maximum glide, excellent pumping, and improved top speed while still maintaining the excellent turning and control that defines the Jet range. To complement the high-end performance of these new wings the complete foils feature a new high aspect stabilizer as well that emphasizes pumping ability and glide. Designed with a thinner profile and higher aspect ratio, they support the higher speed of the HA front wings while giving excellent response to rider input.

JET HA 1040 - NEW SIZE

The 1040 is fast, nimble and great for high speed foiling. Lighter riders will love the feel of this foil when wing foiling or surfing.

The smallest HA wing designed for achieving higher speeds and top performance. The Jet HA 1040 front wing is best suited for wing-surfing, SUP foiling and surf foiling.

JET HA 2140 - NEW SIZE

The 2140 pushes the envelope of flatwater pumping. This foil excels at low speeds or when wing foiling in light winds.

This expands our front wings into the 2000 and up size range allowing the feeling of speed to be accessible for even our largest riders and lightest winds.

* EVA Front Wing Cover Included

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

JET 215- NEW SIZE

The 215 features the same chord and foil section with a substantially reduced span for very tight turns and maneuverability, especially at lower speeds.

• The 215 stabilizer increases turning performance when paired with any of the Jet or Jet HA foil setups

JET 320 + 450

Great stability in all directions with a good balance of speed, directional stability, and pumpability, these stabilizers work well surfing, SUPing, windsurfing, wing-surfing. 

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

JET HA 220, 280 + 310

High aspect and thin profiles make the HA stabilizers great for high speeds and pumping. 

JET HA 220 

A scaled down version of the HA 280 to accommodate the new HA 1040 front wing.

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Our timeless fuselage design continues to feature our unique scarf joint for a secure and completely modular front wing connection system. The front wing and stabilizer connection feature stainless M6 helicoils and stainless steel hardware.

• The 80 cm windsurf fuselage is best paired with boards featuring the mast track system
• The 95 cm windsurf fuselage is best paired with boards featuring a deep tuttle mast box system

*Available in sizes: 55cm - Kite/Jet | 64cm Kite/Jet | 80cm Windsurf | 95cm Windsurf

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

WING-SURFING

The Matador LT takes the Wingsurfer Matador and makes it even leaner and meaner. With the same basic outline, shape and overall structure of the Matador, the Matador LT remains a powerful and stable wing. But sometimes less is more.

For even lighter overall weight the Matador LT comes with a window free canopy and with no removable Y-Handles. Strut shape and diameter have been modified to provide even tighter canopy tension and an additional boost in overall power. Where the Matador has five individual strut handles, two in the front and three in the back, the LT has only three - wide ergonomic grab handles. If you want all the power and stability, but with the minimum swing weight possible for flagging on bumps, swells and waves, the Matador LT does more with less!

CONSTRUCTION AND PERFORMANCE FEATURES

• 3 Wide Ergonomic Handles
• Windowless design (Warning: limited visibility)
  
• No Y-Handles (reduced weight)
  
• Kevlar Leading Edge Reinforcements
  
• Integrated Leash Attachment
• Bladder Lock
  
• SureLock Valve
• One Point Inflation system with 8 mm hoses
• HT Plus LE seam
• Coil Wrist Leash and Bag Included

*PUMP NOT INCLUDED

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

WING-SURFING

The Wing-Surfer Matador is compact, light and powerful. It is designed for experienced wing foilers that want to use the smallest wing possible for the prevailing wind conditions, with a focus on riding swells and waves.

The Matador has a deeper draft and larger diameter leading edge and strut than a comparably sized Wing-Surfer, with the power placed even further forward. The leading-edge taper is more pointed at the center and carries more dihedral across the wingspan. This all comes together to create a wing that drives upwind with ease, then flags in neutral with amazing stability and balance for riding waves, swells and doing downwinders. With tons of sheet-in-and-go power, even heavier riders will find it easy to get up on their foil.

Once flagged into neutral on a wave or swell, the light and nimble airframe all but disappears like a bull fighter’s cape— allowing you to carve and glide with ease. Thus, the name “Matador.”

Unlike the all-around Wing-Surfer, the Matador is designed to be ridden mostly upwind then flagged downwind, so the windows are small and placed where an experienced rider needs them when riding windward, knowing that most of
the time the wing will be flagged behind them with full visibility.

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

WING-SURFING

The Naish Wing-Surfer took the world by storm with its introduction in 2019, launching the sport of Wingsurfing into what is now the fastest-growing water sport in the world. The S25 Wing-Surfer took the basic concept to the next level by adding more sizes, better visibility, and improved performance. This season’s all-new Wing-Surfer MK3 is packed with design features that will carry this rapidly evolving sport well into the future.
 
We started with the basic outline, refining the leading edge curve of each size
wing to maximize drive, balance, and stability in its given wind range. Panel count has been reduced for lighter weight, yet not overly simplified, ensuring that optimum foil shape is retained. Leading edge diameters have been increased in the center of the wing to provide a substantially more rigid airframe, without appearing cartoonishly large as seen on some other wings. In this case, “bigger is better” has limits, and a balance between diameter sizes versus drag, speed potential, weight of leading edge material and internal bladder, etc., must all be taken into consideration. The MK3 leading edges taper to the wing tips for a perfect balance of power delivery, stability, twist, and speed. The center strut diameter has also been increased for stiffness and better control in higher winds and jumping. Draft depth has increased substantially and is further forward, providing more “locked-in” power and increased stability. Everyone, including heavier riders, will especially appreciate the immediate “sheet in and go” feel of the MK3, which provides improved low end and upwind performance, as well as strong wind stability and control. Some riders may find that they will now be able to use a wing that's one size smaller in the same wind
conditions than they would have previously.
 
Handle count has been reduced, with repositioned handles in the right locations for maximum performance and comfort. New removable and adjustable Y-handles between the leading edge and strut provide added tune-ability to the wing. A neoprene pad under the front handle adds extra comfort when handling your
wing, or luffing while riding swells or waves.
 
The windows on the Wing-Surfer MK3 have been redesigned and repositioned to maximize functionality and safety while reducing their overall size. The new windows are narrower in width and placed further forward toward the leading edge of the wing and closer to the center strut — all but eliminating blind spots. The result is perfect visibility, reduced weight, and a smaller package when storing or transporting your wing. A new coil leash design with a smaller, lighter, and easier to secure wrist attachment is standard as is a new and improved carry bag.
 
Finally, new internal reinforcements and advancements have been made in seam construction, especially in high load areas such as strut to leading edge connection and strut to canopy stress points — all contributing to a stronger and longer-lasting wing. Weight reduction was a factor in the design of the Wing-Surfer MK3, but there must be a balance between weight saving, functionality, and durability. The Wing-Surfer MK3 meets this challenge without compromise by perfectly providing a dynamic, responsive, powerful, and long-lasting wing that will suit first-timers equally as well as it will suit the aspiring professional…Session after session.

 Includes: carry pack, and leash

Check out: Robby Naish's "How to Wing-Surf"

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

WING-SURFING

The Naish Wing-Surfer took the world by storm with its introduction in 2019, launching the sport of Wingsurfing into what is now the fastest-growing water sport in the world. The S25 Wing-Surfer took the basic concept to the next level by adding more sizes, better visibility, and improved performance. This season’s all-new Wing-Surfer MK3 is packed with design features that will carry this rapidly evolving sport well into the future.
 
We started with the basic outline, refining the leading edge curve of each size wing to maximize drive, balance, and stability in its given wind range. Panel count has been reduced for lighter weight, yet not overly simplified, ensuring that optimum foil shape is retained. Leading edge diameters have been increased in the center of the wing to provide a substantially more rigid airframe, without appearing cartoonishly large as seen on some other wings. In this case, “bigger is better” has limits, and a balance between diameter sizes versus drag, speed potential, weight of leading edge material and internal bladder, etc., must all be taken into consideration. The MK3 leading edges taper to the wing tips for a perfect balance of power delivery, stability, twist, and speed. The center strut diameter has also been increased for stiffness and better control in higher winds and jumping. Draft depth has increased substantially and is further forward, providing more “locked-in” power and increased stability. Everyone, including heavier riders, will especially appreciate the immediate “sheet in and go” feel of the MK3, which provides improved low end and upwind performance, as well as strong wind stability and control. Some riders may find that they will now be able to use a wing that's one size smaller in the same wind conditions than they would have previously.
 
Handle count has been reduced, with repositioned handles in the right locations for maximum performance and comfort. New removable and adjustable Y-handles between the leading edge and strut provide added tune-ability to the wing. A neoprene pad under the front handle adds extra comfort when handling your wing, or luffing while riding swells or waves.
 
The windows on the Wing-Surfer MK3 have been redesigned and repositioned to maximize functionality and safety while reducing their overall size. The new windows are narrower in width and placed further forward toward the leading edge of the wing and closer to the center strut — all but eliminating blind spots. The result is perfect visibility, reduced weight, and a smaller package when storing or transporting your wing. A new coil leash design with a smaller, lighter, and easier to secure wrist attachment is standard as is a new and improved carry bag.
 
Finally, new internal reinforcements and advancements have been made in seam construction, especially in high load areas such as strut to leading edge connection and strut to canopy stress points — all contributing to a stronger and longer-lasting wing. Weight reduction was a factor in the design of the Wing-Surfer MK3, but there must be a balance between weight saving, functionality, and durability. The Wing Surfer MK3 meets this challenge without compromise by perfectly providing a dynamic, responsive, powerful, and long-lasting wing that will suit first-timers equally as well as it will suit the aspiring professional…Session after session.

Includes: carry pack, and leash

*Pump is not included

PERFORMANCE FEATURES

• Luff strut for balanced power and luffability
• Deeper profile for increased power
• Packs up small
• Moderate diameter leading edge for wing rigidity
• Inflated Structure
• Simple to set up and use

Check out: Robby Naish's "How to Wing-Surf"

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Easy to adjust coil wrist leash to keep your Wing-Surfer secure.

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

WING-SURFING/FOIL SURF

SIZES: 40 | 50 | 60 | 75 | 85 | 95 | 110 | 125 | 140

Our last generation Hover Wing Foil instantly set the standard in design, construction, and weight for the category. This new range of boards is perfectly suited for wing surfing, or to be used as a SUP foil board, SUP downwind foil board or prone foil surf. Changes to this updated model include a more overall rail curve in the outline, slightly narrower tails, increased nose rocker, and more pronounced bottom shaping and concave. Multiple foot strap insert positions, including wider stance options, give riders the opportunity to choose between a windsurfing style, double front strap setup, or a single surf style setup. The rocker is perfectly balanced so the board flies smoothly parallel to the water surface. Track boxes have been moved further back to better match with the multitude of different foils that riders may pair with the boards. The increased tail kick behind foil boxes combined with the beveled rail guarantees easy take odds and sufficient clearance in turns.

The carbon ultra layup, which now includes extra rail cap reinforcements and Kevlar patches when in high-stress areas gives these boards the lightweight edge minimizing swing weight and enhancing overall performance.

3K CARBON/WOOD CNC EPS CORE CONSTRUCTION

• Lightweight CNC cut EPS core
• High density deck-to-bottom foil track system with carbon reinforcement
• Full 3K carbon deck with wood sandwich and double wood in the stance area
• 3K carbon reinforced wood sandwich bottom
• Kevlar reinforced rails
• Carbon strip bottom stringer

EVA DECK

• Diamond diecut EVA pad with micro dot embossing
• Back foot arch support
• Beveled tail kick area

FOOTSTRAP INSERT LAYOUT

• Minimum stance width widened by 5 cm
• 6 hole inserts for front strap positions
• Layout allows for dual strap setup (back strap straight - front strap angled for goofy or regular stance)
• Windsurf style 3 strap setup
• Front: parallel double strap setup

FEATURES FOR S26

• Due to their higher volume-to-length ratio and the option to ride with straps, the 40, 50 and 60 liter boards have gained in popularity. Those sizes have been fine-tuned to be used for both Wing-Suring and surf foiling. The foil track boxes and the tail kick were moved 1.5 inches towards the tail to increase options for lighter riders mounting their foils for surf foiling.
• All models have a decreased nose and tail width. This is more apparent on the smaller sizes up to the 95 and only sightly visible for sizes above 95. The result is reduced swing weight, benefiting its use with the Wing-surfer, especially in windier conditions.
• The foil track positioning has been moved closer to the tail on all sizes. This adjustment is more significant on the smaller sizes than on the bigger sizes. 
• The tail kick was moved further back to align with the foil track boxes, lengthening the water line which results in earlier lift off.
• The double concave nose shape was accentuated, softening re-entry when coming off the foil.

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

WING-SURFING/FOIL SURF

SIZES: 85 | 95 | 110 | 125

Introducing our most popular Hover Wing Foil sizes in an exclusive Limited Edition  board with Robby’s signature skull graphic, paired with a high gloss  finish and a  carbon reveal look in the rail/tail area.

This limited range of boards is perfectly suited for wing surfing, or to be used as a SUP foil board, SUP downwind foil board or prone foil surf. Changes to this updated model include a more overall rail curve in the outline, slightly narrower tails, increased nose rocker, and more pronounced bottom shaping and concave. Multiple foot strap insert positions, including wider stance options, give riders the opportunity to choose between a windsurfing style, double front strap setup, or a single surf style setup. The rocker is perfectly balanced so the board flies smoothly parallel to the water surface. Track boxes have been moved further back to better match with the multitude of different foils that riders may pair with the boards. The increased tail kick behind foil boxes combined with the beveled rail guarantees easy take odds and sufficient clearance in turns.

The carbon ultra layup, which now includes extra rail cap reinforcements and Kevlar patches when in high-stress areas gives these boards the lightweight edge minimizing swing weight and enhancing overall performance.

3K CARBON/WOOD CNC EPS CORE CONSTRUCTION

• Lightweight CNC cut EPS core
• High density deck-to-bottom foil track system with carbon reinforcement
• Full 3K carbon deck with wood sandwich and double wood in the stance area
• 3K carbon reinforced wood sandwich bottom
• Kevlar reinforced rails
• Carbon strip bottom stringer

EVA DECK

• Diamond diecut EVA pad with micro dot embossing
• Back foot arch support
• Beveled tail kick area

FOOTSTRAP INSERT LAYOUT

• Minimum stance width widened by 5 cm
• 6 hole inserts for front strap positions
• Layout allows for dual strap setup (back strap straight - front strap angled for goofy or regular stance)
• Windsurf style 3 strap setup
• Front: parallel double strap setup

FEATURES FOR S26

• All models have a decreased nose and tail width compared to the S25 shape. This is more apparent on the smaller sizes up to the 95 and only sightly visible for sizes above 95. The result is reduced swing weight, benefiting its use with the Wing-surfer, especially in windier conditions.
• The foil track positioning has been moved closer to the tail on all sizes. This adjustment is more significant on the smaller sizes than on the bigger sizes. 
• The tail kick was moved further back to align with the foil track boxes, lengthening the water line which results in earlier lift off.
• The double concave nose shape was accentuated, softening re-entry when coming off the foil.

HAWAIIAN ISLANDS RESIDENTS

Live in Hawaii? Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

WING-SURFING/FOIL SURF 

SIZES: 75 | 95 

With the ever expanding popularity of wing foiling, we’re expanding the range to include an additional color scheme, in our classic Alana theme.

This limited range of boards is perfectly suited for wing surfing, or to be used as a SUP foil board, SUP downwind foil board or prone foil surf. Changes to this updated model include a more overall rail curve in the outline, slightly narrower tails, increased nose rocker, and more pronounced bottom shaping and concave. Multiple foot strap insert positions, including wider stance options, give riders the opportunity to choose between a windsurfing style, double front strap setup, or a single surf style setup. The rocker is perfectly balanced so the board flies smoothly parallel to the water surface. Track boxes have been moved further back to better match with the multitude of different foils that riders may pair with the boards. The increased tail kick behind foil boxes combined with the beveled rail guarantees easy take odds and sufficient clearance in turns.

The carbon ultra layup, which now includes extra rail cap reinforcements and Kevlar patches when in high-stress areas gives these boards the lightweight edge minimizing swing weight and enhancing overall performance.

3K CARBON/WOOD CNC EPS CORE CONSTRUCTION

• Lightweight CNC cut EPS core
• High density deck-to-bottom foil track system with carbon reinforcement
• Full 3K carbon deck with wood sandwich and double wood in the stance area
• 3K carbon reinforced wood sandwich bottom
• Kevlar reinforced rails
• Carbon strip bottom stringer

EVA DECK

• Diamond diecut EVA pad with micro dot embossing
• Back foot arch support
• Beveled tail kick area

FOOTSTRAP INSERT LAYOUT

• Minimum stance width widened by 5 cm
• 6 hole inserts for front strap positions
• Layout allows for dual strap setup (back strap straight - front strap angled for goofy or regular stance)
• Windsurf style 3 strap setup
• Front: parallel double strap setup

FEATURES FOR S26

• All models have a decreased nose and tail width compared to the S25 shape. The result is reduced swing weight, benefiting its use with the Wing-surfer, especially in windier conditions.
• The foil track positioning has been moved closer to the tail on all sizes. This adjustment is more significant on the smaller sizes than on the bigger sizes. 
• The tail kick was moved further back to align with the foil track boxes, lengthening the water line which results in earlier lift off.
• The double concave nose shape was accentuated, softening re-entry when coming off the foil.

HAWAIIAN ISLANDS RESIDENTS

Do you live in Hawaii? Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

WING-SURFING/FOIL SURF 

SIZES: 

85 / 95 / 110 /125 

Our last generation Hover Wing Foil instantly set the standard in design, construction, and weight for the category. This new range of boards is perfectly suited for wing surfing, or to be used as a SUP foil board, SUP downwind foil board or prone foil surf. Changes to this updated model include a more overall rail curve in the outline, slightly narrower tails, increased nose rocker, and more pronounced bottom shaping and concave. Multiple foot strap insert positions, including wider stance options, give riders the opportunity to choose between a windsurfing style, double front strap setup, or a single surf style setup. The rocker is perfectly balanced so the board flies smoothly parallel to the water surface. Track boxes have been moved further back to better match with the multitude of different foils that riders may pair with the boards. The increased tail kick behind foil boxes combined with the beveled rail guarantees easy take odds and sufficient clearance in turns.

Utilizing an S-Glass/wood sandwich construction with carbon and kevlar reinforcements, the GS is available in 110L and 125L the hover wing/foil gs offers the same shape and overall performance as its carbon ultra siblings, yet more durable and affordable construction.

GLASS/WOOD CNC EPS CORE CONSTRUCTION

• CNC cut EPS core
• High density deck-to-bottom foil track system with carbon reinforcement
• Full glass wood sandwich deck and bottom construction

EVA DECK

• Micro dot embossed EVA deck
• Dual layer foot strap area support

FOOTSTRAP INSERT LAYOUT

• Layout allows for dual strap setup (back strap straight - front strap angled for goody or regular stance)
• Windsurf style 3 strap setup
• Front: parallel double strap setup

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

SUP/WS/Wing-Surfer Foiling

The Hover Crossover combines a multitude of boardsports with 4-in-1 performance. The addition of a mast track and footstrap inserts makes it simple to switch sports and use for windsurf foiling or wing-surfing. The rocker line and bottom shapes are made to provide SUP surfing performance when ridden without a foil and come with a quad fin setup equipped with FCS II Eco Fin boxes. The 10” track system is strategically positioned for both surf and windsurf foiling and reinforced with a high-density foam block and stringers that disperse the load of the foil evenly. 

The Hover Crossover reflects Naish’s waterman lifestyle, combining a multitude of boardsports with 4-in-1 performance — wing-surfing, windsurfing, foiling, or SUP. 

CONSTRUCTION

• PVC Sandwich Deck/Wood Sandwich Bottom CNC EPS Core Construction
• CNC Cut EPS Core
• High Density Deck-to-Bottom Foil Track System with Carbon Reinforcement
• PVC Glass Deck Construction 
• Glass/Wood Bottom Construction
• Kevlar Reinforced Rails
• Arch Traction

FEATURES

• Windsurf Style Footstrap Layout
• Diamond Diecut EVA Pad with Micro Dot Embossing 
• Beveled Tail Kick Area

4-in-1 sports setup

• SUP Surf with the Included Quad Fin Setup
• SUP Foil (Foil not Included)
• Windsurf Foil (Foil not Included)
• Wing-Surfer Foiling or Non-Foiling Use

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

SUP/WS Foiling/Wing Foiling

Whether you are windsurf foiling or wing foiling, this board can do it all. Its ultra-compact outline offers great stability with minimal swing weight. With multiple foot strap options maximized for both windsurf foiling or wing foiling combined with a ¾ length EVA deck pad and extra long foil mount track boxes, this is one board that can be set up optimally for either sport without compromise. The Crossover 131 is the new standard in windfoil versatility. 

FEATURES

• Ledge Handle 
• Grooved & Embossed EVA Pad 
• High density PVC Foil Track System with (2) 10” US Boxes 
• Mast Track and Foostrap Inserts 
• Footstraps
• Automatic Pressure Valve Design 

CONSTRUCTION

• Grooved & Embossed EVA Pad = Lightweight + ultimate grip + better durability over time
• Glass Matrix Outer Deck & Bottom = Increased impact strength & durability
• Full PVC Sandwich Glass Matrix Deck & Rail = Lightweight, longitudinal stiffness
• CNC Cut EPS Core = Absolute precision shaping

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Naish aluminum masts have been redesigned entirely for S25, achieving weight savings of 25%, increased stiffness in both bending and torsion as well as a new mast geometry offering easier control at any speed. They feature a new bonding system, which makes them a single unit with the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.

Choose between:

• Mast with Standard plate - 65 cm, 75 cm, 85 cm & 95 cm
• Mast with Abracadabra - 75 cm (sold as complete Abracadabra System)
• Mast with Deep Tuttle - 85 cm & 95 cm

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

INFLATABLE FOILING

With zero compromises on performance, the Hover Inflatable is your new wing-foiling or SUP foiling go-to. We have equipped our proven shapes with additional features to improve performance and value. Adding an 80 L to the line, the Hover Inflatables feature a stiffer bottom carbon plate with track systems, newly added foot strap positions, an improved carry bag with pump storage, and a segmented EVA deck pad for ease of packing. For adventure seekers or travel enthusiasts, the Hover Inflatable packs up into a carry case size, making your next adventure even easier.  

FEATURES

• New foil mount system
• Decreased bag size for easy transport. 
• US Foil Track Boxes
• Lifted Nose Rocker
• Footstrap Inserts (hardware included)

X-WEAVE DROPSTITCH STRINGER CONSTRUCTION 

• EVA deck
• Diamond Diecut EVA Pad with Micro Dot Embossing

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

SUP/WS/Wing-Surfer Foiling

The Hover Crossover combines a multitude of boardsports with 4-in-1 performance. The addition of a mast track and footstrap inserts makes it simple to switch sports and use for windsurf foiling or wing-surfing. The rocker line and bottom shapes are made to provide SUP surfing performance when ridden without a foil and come with a quad fin setup equipped with FCS II Eco Fin boxes. The 10” track system is strategically positioned for both surf and windsurf foiling and reinforced with a high-density foam block and stringers that disperse the load of the foil evenly. 

The Hover Crossover reflects Naish’s waterman lifestyle, combining a multitude of boardsports with 4-in-1 performance — wing-surfing, windsurfing, foiling, or SUP. 

CONSTRUCTION

• PVC Sandwich Deck/Wood Sandwich Bottom CNC EPS Core Construction
• CNC Cut EPS Core
• High Density Deck-to-Bottom Foil Track System with Carbon Reinforcement
• PVC Glass Deck Construction 
• Glass/Wood Bottom Construction
• Kevlar Reinforced Rails
• Arch Traction

FEATURES

• Windsurf Style Footstrap Layout
• Diamond Diecut EVA Pad with Micro Dot Embossing 
• Beveled Tail Kick Area

4-in-1 sports setup

• SUP Surf with the Included Quad Fin Setup
• SUP Foil (Foil not Included)
• Windsurf Foil (Foil not Included)
• Wing-Surfer Foiling or Non-Foiling Use

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

WIND/WING HA 914 and WIND/WING HA 914 - Deep Tuttle Fuselage SEMI-COMPLETE

Performance Windsurf/Wing-Surfer Freeride

With a unique outline and foil section compared to any other wing in the Naish range, the Wind/Wing HA 914 is fast and fluid. Its foil section is thinner than that on any other Naish wing, providing high-speed with fairly low lift for the size of its span. Requiring a relatively high take-off speed, the HA 914 is very stable once up to speed making it a fantastic wing-foil racing wing, windsurfing, or medium to large sized surf wing. Incredible upwind performance combined with an unsurpassed top speed makes the Wind/Wing HA 914 a fantastic powered-up wind foil option.

CONSTRUCTION FEATURES:

• 100% Pre-preg 3K High Gloss Carbon Fiber Front Wing and Stabilizer
• CNC Precision Cut Lightweight Aluminum Fuselage with Corrosion Resistant Stainless Steel M6 Helicoils for the Front Wing and Stabilizer Connection
• Stainless Steel M6 Torx T30 Hardware for all Screwed Connections

SET INCLUDES:

• WIND/WING HA 914 Front Wing 
• Jet HA 280 Stabilizer
• 95 cm Fuselage or 95 cm Deep Tuttle Fuselage
• 5 x 20 mm Torx Head Stainless Steel Screws (Connects Wings to Fuselage)
• 4 x 30 mm M6 T30 Torx Head Stainless Steel Screws and 4 x M6 T nuts (Connects Standard Plate to Board)

• EVA Wing and Stabilizer Covers
• Carry Case 
• Naish Torx T30 Driver

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

WING-SURFING

SIZES:  70 | 80 | 100 | 115 

Introducing the newest board to the foil lineup, the Hover Wing Foil LE ultra compact wing foil board. 15% shorter than our original Hover Wing Foil boards, the compressed volume distribution is focused in the main stance area, allowing for easy starts. This compact board does require a bit more skill to get going on the foil and to remain stable. The compact design dramatically decreases swing weight, feeling like you are riding directly on the foil. It’s two-stage rocker makes it easy to get on the foil, while providing a balanced feel when on the foil with ample nose lift. For riders who already know how to foil and are looking for the shortest board possible, the Hover Wing Foil LE Ultra Compact board is the latest and greatest and can’t be passed up. 

DETAILS

3K Carbon / Wood CNC EPS Core Construction

Provides the lightest board weight possible and the stiffest flex which optimizes your surf foiling performance.

Diamond Diecut EVA Pad with Micro Dot Embossing

The micro dot embossed EVA pad is lightweight, ensuring a strong grip and better durability over time.

High density PVC foil track system with (2) 10” US Boxes

Our high-density PVC foil track system with (2) 10” US boxes will get you on the fin or the foil as quickly as possible.

Back Foot Arch Support

Provides a comfortable stance, an easily recognized foot position, and a better grip on the board.

Tail Kick Lift-Off Design

The tail kick lift-off design eliminates slowing you down, allows you to get on the foil easier, and get flying quicker.

Footstrap Insert Layout (Footstraps not included)

Regardless of what brand or style you’re riding, how much you weigh, what your style is, this board has an option for you.

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

WING-SURF RACING

SIZES:  65 | 85

Remaining at the forefront of progression and development, the new Hover Wing Foil Bullet is designed for riders who want to go as fast as possible and are looking to be a part of the growing wing foil racing movement. Featuring a two-stage rocker, the Bullet provides more “get going” performance and allows you to use a powered up wing and the smallest foil possible to achieve the highest speeds. Featuring a large and steep bevel allows for more rail clearance in order to angle the board harder while riding upwind. The board's flat deck is suited for a wider stance, giving the rider additional control. The Bullet is the latest and greatest in wing foil racing that offers maximum performance when riding powered with the goal of high speeds and winning. 

DETAILS

Molded Carbon Pre-preg Construction

The pre-preg construction guarantees the perfect resin content in the fibers, creating the lightest board weight without sacrificing stength.

Diamond Diecut EVA Pad with Micro Dot Embossing

The micro dot embossed EVA pad is lightweight, ensuring a strong grip and better durability over time.

High density PVC foil track system with (2) 10” US Boxes

Our high-density PVC foil track system with (2) 10” US boxes will get you on the fin or the foil as quickly as possible.

Center Back Foot Arch

Provides a comfortable stance, an easily recognized foot position, and a better grip on the board.

Segmented Rocker Line

Provides ease of getting up and riding on the foil early and has enough nose lift to guarantee smooth entry if coming off the foil at any speed. 

Footstrap Insert Layout (Footstraps not included)

The footstrap insert layout allows for a wider stance that is necessary for high speed racing.

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Performance Foil Surfing/Downwind Foiling/Wing-Surfing

Designed for advanced and semi-advanced foilers looking to push their performance levels in surf, SUP, Wing-surfer, and downwind foiling. These wings feature high aspect ratio planforms and proprietary thin section profiles — the result is maximum glide, excellent pumping, and improved top speed while still maintaining the excellent turning and control that defines the Jet range. To complement the high-end performance of these new wings, the complete foils feature a new high aspect stabilizer that emphasizes pumping ability and glide. Designed with a thinner profile and higher aspect ratio, they support the higher speed of the HA front wings while giving excellent response to rider input.

SET INCLUDES

• Jet HA Front Wing/front part of fuselage
• Jet HA Stabilizer (1040 w/ 220, 1240/1400 w/ 280 & 1800 w/ 310)
• Standard length back part of fuselage
• 2x 20 mm M6 - to connect the front part of the fuselage with the back part/4x 30 mm M6 + T Nuts to connect the mast (sold seperately) with the board track system
• T30 Torx Driver
• EVA Wing Covers
• Carry Case  

CONSTRUCTION FEATURES

• 100% Pre-preg 3K High Gloss Carbon Fiber Front Wing, Stabilizer, and Fuselage (Matte)
• Semi-monocoque front wing fuselage design
• Lightest weight at maximum stiffness and durability
• Stainless Steel M6 Torx T30 Hardware for stabilizer connection and back end fuselage connection
• Compatible with all existing stabilizers

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com