Foil Collection

As the sport of foiling progresses so do our components. Four new sizes are introduced for 2020 that can be used in any sport. Focusing on performance, our masts are aircraft grade extruded aluminum that are 120 grit sandblasted before anodizing. After anodizing all masts are wet sanded using 600 grit to achieve the best possible surface structure and create an ultra smooth and clean release when foiling. Masts connect to both the board mount and fuselage with three M6 x 30 mm titanium Torx screws at each end. Titanium has advantages in weight and are less susceptible to corrosion. All masts are available as separate accessories without screws, available separately, to accommodate different skill levels and sports.

*No screws included

KEY FEATURES

Aluminum = Stiffness + corrosion resistance + low weight
Interchangeable Board Mounts = Added versatility

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Delta shaped front wings coupled with down-turned wingtips deliver the perfect balance between early lift, efficient glide and outstanding turning ability. A slightly flat section along the bottom of the wing adds stability in straight flight while down-turned wingtips heighten control in turns for easy carving and redirection without losing lift. The back wing helps to stabilize the front wing while providing extra power when pumping through flat sections. Adding to the high lift, efficient design, this wing model offers a larger window before stalling, making them easier to ride and control when compared to other wings on the market.

Three front wing sizes widens the range of rider weights and surfing conditions covered. The new XL adds riders above the 210 pound mark to the foiling club while bringing the threshold for surf size own even further. The XL set is also a great option for downwind conditions. And many pairing options allow riders to perfectly tune their setup to their needs, with a M back wing pairing well with the M or L front wing and the L back wing reserved for the XL front wing.

Those SUPers or surfers that dabble in other sports will find a solid multi-sport solution in this setup as well. Performing well in low wind and lower speeds, this ultra-stable setup is good for beginner-to-intermediate kite foiling and other low speed foiling.

Check out our 2019 Thrust Foil Guide for more info

Complete Kit Includes:

• Front Wing
• Back Wing
• 55 cm Aluminum Mast
• Fuselage KS/Surf (Length: 64.2 cm)
• Foil Assembly Screw Set
• Abracadabra/ Standard Board Mount Plate
• Abracadabra/ Standard Board Mount Plate Screw Set
• Foil Cover
• Padded foil case sold separately

*This item ships from Washington

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

The Original Wing-Surfer

The Wing-Surfer is the ultimate handheld inflatable board-riding wing. It's a cross between a windsurfing sail and kiteboarding kite but with no rigging, no hardware and no strings attached! It is made with the same industry leading and high quality materials and construction.

Our goal with the Wing-Surfer was to pinpoint where performance meets simplicity. The Naish One Point Inflation System allows for quick inflation while integrated ergonomic handles along the center strut provides comfortable and easy handling. At 4m, the Wing-Surfer is just the right size to do it all, providing enough power and speed for light wind cruising on a stand up paddleboard or enough power and lift for a foil board to get up and glide in as little as 12 knots of wind. The dihedral swept wing design is perfectly balanced, lightweight, extremely stable and easy to handle. Integrated velcro straps on the handles allow for quick attachment of your SUP paddle for added mobility in case the wind dies. The Wing-Surfer deflates in seconds and packs up into the provided backpack for incredibly easy transport and travel.

All Wing-Surfers feature D2 double ripstop fabric, with the exception of the Green/Orange colorway, which features the Teijin x Naish Quad-Tex quadruple ripstop material.

Includes: carry backpack, pump, and leash.

Check out: Robby Naish's "How to Wing-Surf"

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Re-imagined & Re-designed

Naish introduces an entirely new line of surf foils: re-imagined, re-designed, and fine-tuned over months of testing to improve performance on every level. Further developing our delta wing concept, we've shifted our focus to create more dynamic pumping capabilities and improve our already excellent agility. The improved wings feature new proprietary foil sections that deliver more lift while reducing drag, smoothed frontal geometry that makes turning more intuitive while maintaining the'surf'feel that makes our wings so popular, and refined wingtips that provide excellent grip during turns and are also safer. These new wings are matched by new stabilizers (back wings) that connect seamlessly to our new fuselage design, and deliver improved performance across the board.

Check out our 2020 Jet Foil Guide for more info

Complete Kit Includes

• Abracadabra plate
• Fuselage
• Front Wing
• Mast
• Stabilizer
• Titanium Foil Assembly Screw Set
• 3 x 30 mm M6 Titanium Torx screws
• 3 x 30 mm M6 Stainless Steel Torx screws
• 5 x 20 mm M6 Titanium Torx screws
• Note: Jet 2450 attaches with (3) M6 x 30mm screws. DO NOT USE 20 mm screw with the Jet 2450.
• Abracadabra Mounting Screw Set
• 4 x 30 mm M6 Stainless steel Torx screws
• 4 x Stainless Steel T-nuts
• Foil Wing Covers & Carry Case
• Torx T30 Driver

Jet Foil Range

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Everything needed to assemble the 2019 Naish foil

Includes:

• Three (3) M6 20 mm Screws (connect front wing to fuselage)
• Six (6) M6 30 mm Screws (connect plate to mast, mast to fuselage 3 + 3)
• Two (2) M6 15 mm Screws (connect backwing to fuselage)
• One (1) M6 Mini T-bar (connect backwing to fuselage)

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Compatible for all Naish foil mounts and foil boards. Use these screws to attach your foil mounts to US fin boxes.

Board mount screws for 2019 Abracadabra Plate includes:

• (4) M6 30 mm Screws & (4) M6 T-nuts

Board mount screws for 2019 Standard Plate includes:

• (4) M6 25 mm Screws & (4) M6 T-nuts

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

High Performance Freeride + Big Air

Two-time King of the Air Champion, the Pivot, is unrivaled in terms of performance and versatility. It is famous for its jumping ability, incredible wave riding performance, amazing response and tight, pivoting turns. Backed by Naish's legendary construction, the Pivot uses only the best materials available. The Pivot has a wide wind range and incredible power generation for fast riding and huge boosts. Naish's flagship kite, the Pivot continues to lead the charge in innovation and performance.

PERFORMANCE FEATURES

• Massive Boosts
• Consistent Power Delivery
• Versatile Performance: Big Air, Freeride, and Surf
• Incredible Wind Range
• "Sheet-in-and-go" Feel
• Quick Relaunch

CONSTRUCTION & TECHNOLOGY

• Quad-Tex Ripstop Fabric = Stiff & strong canopy fabric
• Shark Teeth Trailing Edge = Disperses canopy flutter
• HT Plus Seam = High-tensile thread that fortifies the leading edge along the seam
• Molded Strut Ends = Reinforcements protect the struts
• Thermoformed Bumpers = Seam protection when landing and launching the kite
• Aramid Patches = Protects and reinforces the seams
• One Point Inflation System = Quick and easy inflation and deflation through 9 mm hoses
• Diagonal Load Seam = Distributes kite tension for a powerful and balanced kite
• Luff Strut = Adaptable framework provides low-end power
• Anti-Stiction Window = Easy relaunch by letting water drain instantly
• Progressive Profile = Evolving profile along the wingspan allows the center sections to generate power while flatter tips minimize drag and allow for faster turning
• Radial Segmented Arc = Short linear segments accurately form the kites arch

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Foil Surfing

Hover Surf Ascends are for surfers who want a compact foilboard with plenty of volume.
These boards paddle comfortably, take off easily and have minimal swing weight. With even further increased volume for S25, the re-designed rockerline has even more paddle power with implemented tail kick behind the foil boxes. The continuous bevel raises the rail line for more clearance in turns. The newly adapted double concave V nose softens the entry if coming off the foil. The S25 Hover Ascends are performance boards that are super easy to ride even for novice surf foilers.

The carbon ultra construction uses a multi-stage vacuum process with a 30 kg density EPS core, full 3K carbon wrap, wood veneer reinforcement in the stance area, as well as a full deck-tobottom PVC foil track box reinforcement.

PERFORMANCE FEATURES

• High Density PVC Foil Track System with (2) 10” US Boxes = Optimized foil positioning for more or less lift
• Concave Deck = Naturally centers riding stance
• Beveled Rail Design = Increased carving performance
• Carbon Wood Vacuum Sandwich Construction = Extremely lightweight

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

These padded travel cases accommodates and protects a complete foil set with space for one extra front wing.

Jet Standard Case - Fits:

• 2020 Jet 1050 or 1250 completes
• 2019 Thrust M or L completes

Jet Large Case - Fits:

• 2020 Jet 1650 or 2000 completes
• 2019 Thrust XL or XXL completes

WS/Kite Case - Fits:

• 2020 Jet Kite or Windsurf completes
• 2019 Thrust Kite or Windsurf completes

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Stabilizer 210 Kite // New for 2020, the 210 kite back wing moves the rudder function to the wingtips, and leverages a higher aspect planform plus a new low drag foil to increase top speed potential while maintaining the excellent control and intuitive turning ability of our previous back wing.

Stabilizer 320 Jet + WS // All new for 2020, the 320 backwing adds stability to the excellent turning ability of our previous anhedral design, increasing performance on all levels'speed, control, and even more intuitive turning. By moving the rudder control function to the wingtips, we've reduced drag and freed up more center span for stability.

Stabilizer 450 Jet // For 2020, our core surf wings produce the same or better lift size for size and are faster, tighter turning and easier to control. Improved speed makes them suitable for an even wider range of conditions (especially bigger surf), while the constant curve front profile adds control and precision, allowing the rider to draw sharper lines on the wave. The high lift coefficient delivers exceptionally early take off, making these wings not only easier to surf, but also an excellent choice for wake surfing, kite and windsurf foilers.

Check out our 2020 Jet Foil Guide for more info

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

For 2020, Naish introduces an entirely new line of surf foils're-imagined, redesigned, and fine-tuned over months of testing to improve performance on every level. Further developing our delta wing concept, we've focused on better pumping and improving our already excellent agility. The new wings feature new proprietary foil sections that deliver more lift while reducing drag, smoothed frontal geometry that makes turning more intuitive while maintaining the'surf'feel that makes our wings so popular, and refined wingtips that provide excellent grip during turns and are also safer.

Jet 1050 + 1250 // For 2020, our core surf wings produce the same or better lift size for size and are faster, tighter turning and easier to control. Improved speed makes them suitable for an even wider range of conditions (especially bigger surf), while the constant curve front profile adds control and precision, allowing the rider to draw sharper lines on the wave. The high lift coefficient delivers exceptionally early take off, making these wings not only easier to surf, but also an excellent choice for wake surfing, kite and windsurf foilers.

Jet 1650 // Re-engineered from the ground up, the Jet 1650 wing brings many of the performance advantages of smaller wings (speed and responsiveness) to a higher lift package that is perfect for heavier riders, or anyone just looking for more lift. Every parameter of the wing from aspect ratio to wingtip washout has been fine-tuned strike the perfect balance between lift and maneuverability.

The 2020 Jet Wing 1650 replaces the 2019 Surf XL Wing.

Jet 2000 // Brand new for 2020, the Jet 2000 foil was designed to create the best performing downwind and small surf foil possible. With a higher aspect ratio, a new proprietary section and a host of new features, the Jet 2000 sets a new standard for big wing.

This new design is optimized for the emerging sport of downwind foiling, but we also recommend it for small, gutless surf due to it's impressive turning ability for it's size. It features a higher aspect ratio for improved pumping and maximum glide time, and a refined section with reduced frontal area for speed, and a flatter profile than our pure surf wings. Compared to a more surf oriented wing, the Jet 2000 is more directionally stable yet still capable of carving turns for surfing.

Jet 2450 // Brand new for 2020, the Jet 2450 foil was designed to create the best performing downwind foil possible. Sharing the higher aspect ratio and new proprietary section of the Jet 2000, the 2450 is the largest wing Naish makes and the ultimate downwind gliding machine.

The name says it all'the 2450 is a big wing designed to produce big lift. A high lift glider foil section is married to a new outline geometry with a flatter profile and wider wingspan designed to extract maximum efficiency from the surface area while remaining easy to turn and control. This is the largest wing in the Naish range, and is the ultimate'go to'wing for heavier riders (up to 250 lbs) or anyone who wants lift to burn.

*Don't forget the Jet 2450 screws. The Jet 2450 attaches with (3) M6 x 30 mm screws. DO NOT use 20 mm screws with this wing.

Check out our 2020 Jet Foil Guide for more info

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

While the Hover Surf Comet echos a traditional surfboard silhouette, the Hover Surf Ascend packs more volume per inch (in height). Wider than our Comets, with a more square and parallel outline, the Ascends pick up even the tiniest waves with little effort. The concave deck section is not only more comfortable when paddling, it is also a'self centering'feature when popping up'guiding the feet into the ideal position in relation to the foil.

Building from the success of the previous year, the 2020 model has been refined with new sizes and adjusted specs. The overall outline is more parallel for better stability while paddling and take off. The new 5'4'and 5'8'sizes also feature slightly narrower widths for better efficiency while paddling. A new rockerline with a flattened nose entry for increased paddle power also contributes to these boards ability to catch waves with ease.

Shaped with pure foiling performance in mind, the Ascend range features beveled rails running from nose to tail. These smooth the transition while getting up onto the foil and allow you to carve hard without catching rail.

If catching small waves early and getting to your feet quickly is the key to surf foiling, the Hover Surf Ascend unlocks the ride easily and intuitively. The Hover Ascends are recommended for riders who are looking for a dedicated design that allows them to go shorter (in consideration of volume) without sacrificing paddle ability.

Hover Surf Ascend

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Connects any 2020 stabilizer to 2018 and 2019 fuselages.

*Includes (2) M6 16 mm Stainless Steel Torx Screws

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Naish aluminum masts have been redesigned entirely for S25, achieving weight savings of 25%, increased stiffness in both bending and torsion as well as a new mast geometry offering easier control at any speed. They feature a new bonding system, which makes them a single unit with the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.

Choose between:

• Mast with Standard plate - 65 cm, 75 cm, 85 cm & 95 cm
• Mast with Abracadabra - 75 cm (sold as complete Abracadabra System)
• Mast with Deep Tuttle - 85 cm & 95 cm

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Foil screw set for your S25 Jet foil complete. All screws are Torx head stainless steel, which offer superior torque and are corrosion resistant. Kit includes:

• Three (3) M6 25mm screws (connects mast to fuselage)
• Five (5) M6 20mm screws (connects wings to fuselage)
• Note: screws to connect board mount to board are sold separately.

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

The new HA stabilizers emphasize pumping ability and glide. Designed with a thinner profile and higher aspect ratio, they support the higher speed of the HA front wings while giving excellent response for pumping.

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Easy for learning providing the performance to progress

All new shape for 2020, with a thin profile that makes water-starting easy, lightweight Durafinish construction.

Brand new for 2020 the Hover 144 is the board for foil kiters of all levels. Influenced by the Hover 112 & 127, the overall shape and outline make learning to foil easy yet still providing the performance needed to progress and not be outgrown. The freeride shape with minimal volume offers great stability and makes water-starting easy and forgiving.

Made with a precise, CNC cut closed cell core and finished with our new lightweight Durafinish for excellent durability without added weight. The dual 10'track system allow users to precisely adjust foil position for an optimized foiling experience.

When pairing Naish Hover Foilboards with your Naish Foil, use the screws supplied with the foil.

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Naish has added a new Jet HA 1240 wing to our high aspect lineup for S25. These wings are designed for advanced and semi-advanced foilers looking to push their performance levels in surf, SUP, Wing-Surfer and downwind foiling. These wings feature high aspect ratio planforms and proprietary thin section profiles—the result is maximum glide, excellent pumping, and improved top speed while still maintaining the excellent turning and control that defines the Jet range.

Check out our S25 Jet Foil Guide for more info

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Expert Performance

Designed for advanced and semi-advanced foilers looking to push their performance levels in surf, SUP, Wing-surfer and downwind foiling. These wings feature high aspect ratio planforms and proprietary thin section profiles – the result is maximum glide, excellent pumping, and improved top speed while still maintaining the excellent turning and control that defines the Jet range. To compliment the high-end performance of these new wings the complete foils feature a new high
aspect stabilizer as well that emphasize pumping ability and glide. Designed with a thinner profile and higher aspect ratio, they support the higher speed of the HA front wings while giving excellent response to rider input.

To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra-lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.

Check out our S25 Jet Foil Guide for more info

Features

• Front Wing = Optimized glide & improved top speed
• Stabilizer = High-speed stability & responsive pumping
• Mast = 25% lighter, stiffer and offers more control at any speed
• Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years
• Standard Plate Bonded with Aircraft Grade Extruded Aluminum 95 cm Mast = Solid board connection + sealed mast
• Updated Aircraft Grade Aluminum Jet/ Kite 64 cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts
• 5 x 20 mm Torx head Torx Head Stainless Steel Screws (Connects wings to fuselage) = Superior torque + corrosion resistant
• 3 x 25 mm Torx Head Stainless Steel Screws (Connects mast to fuselage) = Superior torque + corrosion resistant
• 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (Connects Standard Plate to Board) = Superior torque + corrosion resistant
• Naish Torx Driver = Custom T30 Driver provided for easy foil assembly
• Padded Carry Case = Protect your foil while storing + slots for additional wings
• EVA Wing & Stabilizer Covers = Wing protection when not in use

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Forgiving and user-friendly, the Thrust KS 2 Foil Complete delivers a super smooth foiling experience for anyone from beginner to advanced to cruise on. Its segmented front wing combines the stability of a dihedral shape with the early take-off and low speed lift of an anhedral wing. Tuned for balance, the KS 2 reduces pumping time by helping riders quickly find a stable plane and lock in, while the higher aspect ratio lengthens the glide. A large sweet spot delivers ample stability for a more natural feel that encourages riders to move more freely and gain the confidence to progress. Smooth gliding and incredibly intuitive, this effortless setup frees your attention to enjoy the experience and expand your abilities.

Check out our 2019 Thrust Foil Guide for more info

Complete Kit Includes:

• Front Wing WS 1
• Back Wing WS 1
• 70 cm Aluminum Mast
• Fuselage WS (Length: 64.2 cm)
• Foil Assembly Screw Set
• Abracadabra/ Standard Board Mount Plate
• Abracadabra/ Standard Board Mount Plate Screw Set
• Foil Cover
• Padded foil case sold separately

*This item ships from Washington

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

The S25 fuselages have gone through a major design update making them lighter while maintaining their structural strength. Naish has also equipped them with a stainless steel helicoil setup, which in combination with the new stainless steel screw hardware* makes them more resistant to corrosion.

Available in three sizes:

• Kite/Jet Short | 55 cm: increased turning ability for surf, kite and Wing-Surf foiling
  
• Kite/Jet | 64 cm: our ideally balanced surf, kite and Wing-Surf fuselage
• Windsurf | 80 cm: a longer fuselage with the mast intake positioned further back on the fuselage for optimized balance for windsurfing

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Every year, the Naish design team explores new materials and constructions in an effort to cut weight to make our foils lighter and perform better. Starting at the core for S25, the team used a new material that retains the same strength and impact resistance while dramatically decreasing the overall weight. These cores are then wrapped with a chopped carbon/UD carbon fiber layup making the S25 front wings up to 25% lighter than previous years. No matter what type of foiling you are doing (surf, kite, windsurf or Wing-Surf) these new foils yet again up the ante in performance and control.

Note: For Jet Foil 2450 front wing, you will need to purchase longer screws. There are two options:

• Screw Set | Jet 2450 Front Wing
• Screw Set | Jet 2450 Complete

Check out our S25 Jet Foil Guide for more info

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Jet 1050 + 1250 // Surf + Wake

Naish Jet foils feature a medium aspect ratio delta wing planform with moderate
anhedral to deliver the optimum combination of early lift, speed and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from windsurfing and wing-surfing to downwind kite foiling. The 1050 and 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for lightwind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 backwing, which gives the complete setup more intuitive turning and response for pumping.

Jet 1650, 2000 + 2450 // Surfing + Downwind

The Jet 1650, 2000 and 2450 share many similar features to their smaller 1050 & 1250
counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing
planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind and Wing-Surf foiling. These wings are paired with the Stabilizer 450 backwing, which gives the complete setup more lift at lower speeds and are optimized for improved turning and pumping performance.

To make the S25 complete foil Naish’s best yet, each component has been completely
redesigned with an emphasis on making them ultra-lightweight and strong. The mast
is a new design that is 25% lighter while improving bending resistance and torsional
strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.

Check out our S25 Jet Foil Guide for more info

Features

• Front Wing = Early takeoff with a playful feel
• Stabilizer = Smooth takeoff and comfortable mid-range feel
• Mast = 25% lighter, stiffer and offers more control at any speed
• Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years
• Standard Plate Bonded with Aircraft Grade Extruded Aluminum 95 cm Mast = Solid board connection + sealed mast
• Updated Aircraft Grade Aluminum Jet/ Kite 64 cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts
• Jet 1650/2000 | 5 x 20 mm Torx Head Stainless Steel Screws (Connects wings to fuselage) = Superior torque + corrosion resistant
• Jet 2450 | 3 x 30 mm & 2 x 20 mm Torx Head Stainless Steel Screws (Connects wings to fuselage) = Superior torque + corrosion resistant
• 3 x 25 mm Torx Head Stainless Steel Screws (Connects mast to fuselage) = Superior torque + corrosion resistant
• 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (Connects Standard Plate to Board) = Superior torque + corrosion resistant
• Naish Torx Driver = Custom T30 Driver provided for easy foil assembly
• Padded Carry Case = Protect your foil while storing + slots for additional wings
• EVA Wing & Stabilizer Covers = Wing protection when not in use

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Forgiving and user-friendly, the Thrust KS 2 Foil Complete delivers a super smooth foiling experience for anyone from beginner to advanced to cruise on. Its segmented front wing combines the stability of a dihedral shape with the early take-off and low speed lift of an anhedral wing. Tuned for balance, the KS 2 reduces pumping time by helping riders quickly find a stable plane and lock in, while the higher aspect ratio lengthens the glide. A large sweet spot delivers ample stability for a more natural feel that encourages riders to move more freely and gain the confidence to progress. Smooth gliding and incredibly intuitive, this effortless setup frees your attention to enjoy the experience and expand your abilities.

Check out our 2019 Thrust Foil Guide for more info

Complete Kit Includes

• Front Wing KS 2
• Back Wing KS 2
• 90 cm Aluminum Mast
• Fuselage KS/Surf (Length: 64.2 cm)
• Foil Assembly Screw Set
• Abracadabra/ Standard Board Mount Plate
• Abracadabra/ Standard Board Mount Plate Screw Set
• Foil Cover
• Padded foil case sold separately

*This item ships from Washington

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Its thin rails and low volume makes water-starting easy.

Whether just getting started or looking to take your foiling to the next level, the Hover 160 foilboard is a fantastic and forgiving choice for gliding above the water. Featuring a PU foam core, fiberglass and top sheet construction, the Hover 160 is incredibly durable. Its flat rocker line, rounded edges and generous buoyancy translate to early and forgiving planing. With plenty of volume, the Hover 160 offers a hefty sweet spot and great stability. Drastically limiting the potential to nose dive, the Hover 160 is the'ace up your sleeve'. Master the art of foiling with the durable and easy-to-use Hover 160.

The Hover Kite 160 foilboard has a shallower track system and therefore requires the shorter screws as supplied with the board. Board includes M6 18mm screws. This board CANNOT be used with the longer screws that come with the Naish Kite Performance Freeride Complete.

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

For S25, the Naish design team took a different approach for foil kiting aiming to reach a broader range of rider skills, sizes and needs. Featuring three new front wings and stabilizers—each designed to give better performance in their designated target—rather than one foil that does everything, but doesn’t necessarily excel in any one area.

Front Wing Kite 650

Built from the proven KS2, the Kite 650 front wing takes the DNA of the Kite 810 wing in a smaller, higher aspect version that still takes off early yet adds even more speed and control (especially in stronger winds). Featuring a medium-high aspect delta planform, mild center span anhedral and washed out flattened wingtips for low drag and and balanced, easy feel. Ideal for intermediate-to-expert riders, the Kite 650 perfectly blends smooth and early takeoff, a wider range and improved speed and control.

Front Wing Kite 810

Featuring a medium-high aspect delta planform, mild center span anhedral, and washed out flattened wingtips for low drag and and balanced, easy feel, the 810 is ideal for intermediate to expert riders. The new 810 directly replaces the KS2, adding smooth and early takeoff, a wider range and improved speed and control.

Front Wing Kite 960

This new entry-level wing refines proven concepts like an elliptical low aspect planform and thin foil section to give first time foilers the best possible experience on the water. Takeoffs are extremely smooth, with some delay to allow maximum comfort and control, speed is good but not intimidating and the foil turns intuitively with a ‘surfy’ feel.

Check out our S25 Jet Foil Guide for more info

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Screw set for Surf Foil Jet 2450 Front Wing.

Includes:

• (3) M6 x 30 mm screws

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

The system fits our aluminum mast range with both current and previous years.

Includes:

• Mast attachment (black piece in picture)
• (3) M6 titanium Torx screws.
• Does not include Abracadabra Thumb Screw

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Kite 810 // PERFORMANCE FREERIDE

For S25 Naish is pushing forward with creating a foil that is aimed at intermediate-to advanced riders looking for improved performance at the top end. The Kite 810 front wing features a medium-high aspect delta planform, mild center span anhedral, and washed out flattened wingtips for low drag and a balanced, easy feel. This wing is smooth with early takeoff and a wider range with higher speed and control. For improved pumping and top end speed we’ve paired it with the Jet HA 280 stabilizer but wings are not the only things that are new. S25 features a redesigned fuselage and mast as well. The fuselage is lighter and features stainless steel helicoil inserts to further reduce potential corrosion.

The 95cm mast has been completely redesigned to be stiffer in both bending and torsional flex and is 25% lighter than previous years. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.

Kite 960 // FREERIDE

For kiters focused on early lift and easier progression, the Kite 960 is the new entry-level wing that refines proven concepts such as an elliptical low aspect planform and thin foil section to give entry level foilers the best possible experience on the water. Takeoffs are extremely smooth, with some delay to allow maximum comfort and control. Speed is good but not intimidating and the foil turns intuitively with a ‘surfy’ feel. For improved lift and carving stability we’ve paired it with the Kite 270 stabilizer but wings are not the only things that are new. S25 features a redesigned fuselage and mast as well. The fuselage is lighter and features stainless steel helicoil inserts to further reduce corrosion.

The 85cm mast has been completely redesigned to be stiffer in both bending and torsional flex and is 25% lighter than previous years. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.

Check out our S25 Jet Foil Guide for more info

Features

• Kite Front Wing = Early takeoff with a playful feel
• Kite Stabilizer = Smooth takeoff and comfortable mid-range feel
• 95 cm Mast = 25% lighter, stiffer and offers more control at any speed
• Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years
• Standard Plate Bonded with Aircraft Grade Extruded Aluminum 95 cm Mast = Solid board connection + sealed mast
• Updated Aircraft Grade Aluminum Jet/ Kite 64 cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts
• 5 x 20 mm Torx Head Stainless Steel Screws (Connects Wings to Fuselage) = Superior torque + corrosion resistant
• 3 x 25 mm Torx Head Stainless Steel Screws (Connects Mast to Fuselage) = Superior torque + corrosion resistant
• 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (Connects Standard Plate to Board) = Superior torque + corrosion resistant
• Naish Torx Driver = Custom T30 Driver provided for easy foil assembly
• Padded Carry Case = Protect your foil while storing + slots for additional wings
• EVA Wing & Stabilizer Covers = Wing protection when not in use

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com