SUP Collection

Re-imagined & Re-designed

Naish introduces an entirely new line of surf foils: re-imagined, re-designed, and fine-tuned over months of testing to improve performance on every level. Further developing our delta wing concept, we've shifted our focus to create more dynamic pumping capabilities and improve our already excellent agility. The improved wings feature new proprietary foil sections that deliver more lift while reducing drag, smoothed frontal geometry that makes turning more intuitive while maintaining the'surf'feel that makes our wings so popular, and refined wingtips that provide excellent grip during turns and are also safer. These new wings are matched by new stabilizers (back wings) that connect seamlessly to our new fuselage design, and deliver improved performance across the board.

Check out our 2020 Jet Foil Guide for more info

Complete Kit Includes

• Abracadabra plate
• Fuselage
• Front Wing
• Mast
• Stabilizer
• Titanium Foil Assembly Screw Set
• 3 x 30 mm M6 Titanium Torx screws
• 3 x 30 mm M6 Stainless Steel Torx screws
• 5 x 20 mm M6 Titanium Torx screws
• Note: Jet 2450 attaches with (3) M6 x 30mm screws. DO NOT USE 20 mm screw with the Jet 2450.
• Abracadabra Mounting Screw Set
• 4 x 30 mm M6 Stainless steel Torx screws
• 4 x Stainless Steel T-nuts
• Foil Wing Covers & Carry Case
• Torx T30 Driver

Jet Foil Range

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Jet 1050 + 1250 // Surf + Wake

Naish Jet foils feature a medium aspect ratio delta wing planform with moderate
anhedral to deliver the optimum combination of early lift, speed and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from windsurfing and wing-surfing to downwind kite foiling. The 1050 and 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for lightwind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 backwing, which gives the complete setup more intuitive turning and response for pumping.

Jet 1650, 2000 + 2450 // Surfing + Downwind

The Jet 1650, 2000 and 2450 share many similar features to their smaller 1050 & 1250
counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing
planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind and Wing-Surf foiling. These wings are paired with the Stabilizer 450 backwing, which gives the complete setup more lift at lower speeds and are optimized for improved turning and pumping performance.

To make the S25 complete foil Naish’s best yet, each component has been completely
redesigned with an emphasis on making them ultra-lightweight and strong. The mast
is a new design that is 25% lighter while improving bending resistance and torsional
strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.

Check out our S25 Jet Foil Guide for more info

Features

• Front Wing = Early takeoff with a playful feel
• Stabilizer = Smooth takeoff and comfortable mid-range feel
• Mast = 25% lighter, stiffer and offers more control at any speed
• Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years
• Standard Plate Bonded with Aircraft Grade Extruded Aluminum 95 cm Mast = Solid board connection + sealed mast
• Updated Aircraft Grade Aluminum Jet/ Kite 64 cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts
• Jet 1650/2000 | 5 x 20 mm Torx Head Stainless Steel Screws (Connects wings to fuselage) = Superior torque + corrosion resistant
• Jet 2450 | 3 x 30 mm & 2 x 20 mm Torx Head Stainless Steel Screws (Connects wings to fuselage) = Superior torque + corrosion resistant
• 3 x 25 mm Torx Head Stainless Steel Screws (Connects mast to fuselage) = Superior torque + corrosion resistant
• 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (Connects Standard Plate to Board) = Superior torque + corrosion resistant
• Naish Torx Driver = Custom T30 Driver provided for easy foil assembly
• Padded Carry Case = Protect your foil while storing + slots for additional wings
• EVA Wing & Stabilizer Covers = Wing protection when not in use

Expert Performance

Designed for advanced and semi-advanced foilers looking to push their performance levels in surf, SUP, Wing-surfer and downwind foiling. These wings feature high aspect ratio planforms and proprietary thin section profiles – the result is maximum glide, excellent pumping, and improved top speed while still maintaining the excellent turning and control that defines the Jet range. To compliment the high-end performance of these new wings the complete foils feature a new high
aspect stabilizer as well that emphasize pumping ability and glide. Designed with a thinner profile and higher aspect ratio, they support the higher speed of the HA front wings while giving excellent response to rider input.

To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra-lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.

Check out our S25 Jet Foil Guide for more info

Features

• Front Wing = Optimized glide & improved top speed
• Stabilizer = High-speed stability & responsive pumping
• Mast = 25% lighter, stiffer and offers more control at any speed
• Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years
• Standard Plate Bonded with Aircraft Grade Extruded Aluminum 95 cm Mast = Solid board connection + sealed mast
• Updated Aircraft Grade Aluminum Jet/ Kite 64 cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts
• 5 x 20 mm Torx head Torx Head Stainless Steel Screws (Connects wings to fuselage) = Superior torque + corrosion resistant
• 3 x 25 mm Torx Head Stainless Steel Screws (Connects mast to fuselage) = Superior torque + corrosion resistant
• 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (Connects Standard Plate to Board) = Superior torque + corrosion resistant
• Naish Torx Driver = Custom T30 Driver provided for easy foil assembly
• Padded Carry Case = Protect your foil while storing + slots for additional wings
• EVA Wing & Stabilizer Covers = Wing protection when not in use