Foil Kits

Performance Foil Surfing/Downwind Foiling/Wing-Surfing

Designed for advanced and semi-advanced foilers looking to push their performance levels in surf, SUP, Wing-surfer, and downwind foiling. These wings feature high aspect ratio planforms and proprietary thin section profiles — the result is maximum glide, excellent pumping, and improved top speed while still maintaining the excellent turning and control that defines the Jet range. To complement the high-end performance of these new wings, the complete foils feature a new high aspect stabilizer that emphasizes pumping ability and glide. Designed with a thinner profile and higher aspect ratio, they support the higher speed of the HA front wings while giving excellent response to rider input.

SET INCLUDES

• Jet HA Front Wing/front part of fuselage
• Jet HA Stabilizer (1040 w/ 220, 1240/1400 w/ 280 & 1800 w/ 310)
• Standard length back part of fuselage
• 2x 20 mm M6 - to connect the front part of the fuselage with the back part/4x 30 mm M6 + T Nuts to connect the mast (sold seperately) with the board track system
• T30 Torx Driver
• EVA Wing Covers
• Carry Case  

CONSTRUCTION FEATURES

• 100% Pre-preg 3K High Gloss Carbon Fiber Front Wing, Stabilizer, and Fuselage (Matte)
• Semi-monocoque front wing fuselage design
• Lightest weight at maximum stiffness and durability
• Stainless Steel M6 Torx T30 Hardware for stabilizer connection and back end fuselage connection
• Compatible with all existing stabilizers

*Not compatible with S26 and older masts

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

Foil Surfing/Wake Foiling/Wing-Surfing

Introducing the new lightweight semi-monocoque full carbon Naish foil system. Our new high-end carbon system offers the most direct and stiff front foil to fuselage application yet. Our tight-fit scarf joint secures the back end of the fuselage with two M6 Torx screws with zero play. The system is compatible with all of our new Carbon 35, Carbon 100, and aluminum masts. The back end of the fuselage is available in two lengths (semi-complete sets include the standard length back end). All fuselage back ends allow for two stabilizer positions and are compatible with all current and previous stabilizer styles. This new system is the ultimate in lightweight, stiffness and durability, providing the most direct rider-foil unit possible.

The all-new MA Foil design marries the proven DNA of the successful Naish HA series with a medium aspect ratio (‘MA’) planform. The reduced span results in faster, more responsive turning while the global geometry delivers the perfect balance of early takeoff, roll stability, and pitch control at speed. The truncated wingtip concept provides the maximum possible glide for the reduced span, making maneuvers effortless while significantly reducing drag for higher top speeds — the bluntness of the tip is also an important safety feature. The result is a foil that is both easy to ride and yet offers top performance for riders pushing the limits with jumping and maneuvers.

SET INCLUDES

• Jet MA Front Wing/ front part of fuselage 
• Jet HA Stabilizer  
• Standard length back part of fuselage
• 2x 20 mm M6 - to connect the front part of the fuselage with the back part/ 4x 30 mm M6 + T Nuts - to connect the mast (sold seperately) with the board track system
• T30 Torx Driver
• EVA Wing Covers
• Carry Case 

 CONSTRUCTION FEATURES

• 100% Pre-preg 3K High Gloss Carbon Fiber Front Wing, Stabilizer, and Fuselage (Matte)
• Semi-monocoque front wing fuselage design
• Lightest weight at maximum stiffness and durability
• Stainless Steel M6 Torx T30 Hardware for stabilizer connection and back end fuselage connection
• Compatible with all existing stabilizers

*Not compatible with S26 and older masts

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

JET 1050 & 1250 SEMI-COMPLETE

Foil Surfing/Wake Foiling/Wing-Surfing

Naish Jet foils feature a medium aspect ratio delta-wing planform with moderate anhedral to deliver the optimum combination of early lift, speed, and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from windsurfing and wing-surfing to downwind kite foiling. The 1050 and 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for light wind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320, which gives the complete setup more intuitive turning and response for pumping. 

JET 1650, 2000 & 2450 SEMI-COMPLETE

Foil Surfing/Downwind Foiling/Wing-Surfing

The Jet 1650, 2000 & 2450 share many similar features to their smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind, and Wing-Surf foiling. These wings are paired with the Stabilizer 450, which gives the complete setup more lift at lower speeds and is optimized for improved turning and pumping performance.

Jet 1050 is ideal for riders 120-170 lbs

Jet 1250 is ideal for riders 160-210 lbs

Jet 1650 is ideal for riders up to 225 lbs

Jet 2000 is ideal for riders up to 250 lbs

Jet 2450 is ideal for riders +250 lbs

CONSTRUCTION FEATURES

100% Pre-preg 3K High Gloss Carbon Fiber Front Wing and Stabilizer

CNC Precision Cut Lightweight Aluminum Fuselage with Corrosion Resistant      Stainless Steel M6 Helicoils for the Front Wing and Stabilizer Connection

Stainless Steel M6 Torx T30 Hardware for all Screwed Connections

SET INCLUDES

• Jet 1050, 1250, 1650, 2000 or 2450 Front Wing 
• Jet Stabilizer 320 or 450 
• 64 cm Fuselage
• 5 x 20 mm Torx Head Stainless Steel Screws (Connects Wings to Fuselage) = Superior torque + corrosion resistant
• 4 x 30 mm M6 T30 Torx Head Stainless Steel Screws and 4 x M6 T nuts (Connects Standard Plate to Board) = Superior torque + corrosion resistant
• EVA Wing and Stabilizer Covers
• Carry Case 
• Naish Torx T30 Driver 

The Jet 1050 & 1250 includes:

• Jet 1050 or 1250  front wing (with EVA cover)
• Jet 320 stabilizer (with EVA cover)

The Jet 1650, 2000 & 2450 includes:

• Jet 1650, 2000 or 2450 front wing (with EVA cover)
• Jet 450 stabilizer (with EVA cover)

*Not compatible with S26 and older masts

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

JET HA 1040, 1240, 1400, 1800 & 2140

Expert Performance Foil Surfing/Downwind Foiling/Wing-Surfing

Designed for advanced and semi-advanced foilers looking to push their performance levels in surf, SUP, wing-surfing, and downwind foiling. New for this season is the 1040 and 2140, further expanding the HA range. The 1040 is fast, nimble, and great for high-speed foiling. Lighter riders will love the feel of this foil when wing foiling or surfing. These wings feature high aspect ratio planforms and proprietary thin section profiles — the result is maximum glide, excellent pumping, and improved top speed while still maintaining the excellent turning and control that defines the Jet range. To complement the high-end performance of these new wings, the complete foils feature a new high aspect stabilizer that emphasizes pumping ability and glide. Designed with a thinner profile and higher aspect ratio, they support the higher speed of the HA front wings while giving excellent response to rider input.

The 2140 pushes the envelope of flatwater pumping. This foil excels at low speeds or when wing foiling in light winds. 

 CONSTRUCTION FEATURES:

• 100% Pre-preg 3K High Gloss Carbon Fiber Front Wing and Stabilizer
• CNC Precision Cut Lightweight Aluminum Fuselage with Corrosion Resistant Stainless Steel M6 Helicoils for the Front Wing and Stabilizer Connection
• Stainless Steel M6 Torx T30 Hardware for all Screwed Connections

SET INCLUDES:

• Jet HA 1040, 1240, 1400, 1800 or2140 Front Wing 
• Stabilizer HA 220, 280 or 310 Back Wing 
• 64 cm Fuselage
• 5 x 20 mm Torx Head Stainless Steel Screws (Connects Wings to Fuselage)
• 4 x 30 mm M6 T30 Torx Head Stainless Steel Screws and 4 x M6 T nuts (Connects Standard Plate to Board) 
• EVA Wing and Stabilizer Covers
• Carry Case 
• Naish Torx T30 Driver

The Jet HA 1040 includes:

• Jet HA 1040 front wing (with EVA cover)
• Jet HA 220 stabilizer (with EVA cover)

The Jet HA 1240/1400 includes:

• Jet HA 1240 or 1400 front wing (with EVA cover)
• Jet HA 280 stabilizer (with EVA cover)

 The Jet HA 1800/2140 includes:

• Jet HA 1800 or 2140 front wing (with EVA cover)
• Jet HA 310 stabilizer (with EVA cover)

*Not compatible with S26 and older masts

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

JET MA 850, 1000, 1200, 1600 and 2000

Naish is pleased to introduce the MA series. This new design marries the proven DNA of the successful Naish HA series with a medium aspect ratio ('MA') planform. The reduced span results in faster, more responsive turning while the global geometry delivers the perfect balance of early take off, roll stability and pitch control at speed. The truncated wingtip concept provides the maximum possible glide for the reduced span, making maneuvers effortless while significantly reducing drag for higher top speeds - the bluntness of the tip is also an important safety feature. The result is a foil that is both easy to ride and yet offers top performance for riders pushing the limits with jumping and maneuvers. 

This new design is offered in a full range of sizes so that riders of different weights and skill levels can optimize their set up for the ultimate wing foiling experience. 

CONSTRUCTION FEATURES

SET INCLUDES

• Jet MA 850, 1000, 1200, 1600 or 2000 Front Wing
• Jet HA 220, 280 or 310 Stabilizer
• 64 cm Fuselage
• 5 x 20 mm Torx Head Stainless Steel Screws (Connects Wings to Fuselage) = Superior torque + corrosion resistant
• 4 x 30 mm M6 T30 Torx Head Stainless Steel Screws and 4 x M6 T nuts (Connects Standard Plate to Board) = Superior torque + corrosion resistant
• EVA Wing and Stabilizer Covers
• Carry Case 
• Naish Torx T30 Driver

The Jet MA 850 & 1000 includes:

• Jet 850 or 1000  front wing (with EVA cover)
• Jet HA 220 stabilizer (with EVA cover)

The Jet MA 1200 & 1600 includes:

• Jet 1650, 2000 or 2450 front wing (with EVA cover)
• Jet HA 280 stabilizer (with EVA cover)

The Jet MA 2000 includes:

• Jet MA 2000 front wing (with EVA cover)
• Jet HA 310 stabilizer (with EVA cover)

*Not compatible with S26 and older masts

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

*Not compatible with S26 and older fuselages

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com

*Not compatible with S26 and older fuselages

HAWAIIAN ISLANDS RESIDENTS

Save on shipping and order through our Naish Maui Flagship Store:

• Call (808) 575-5432 x34
• Email nitsan@naishsails.com